Once you have
configured a location into the software you are now just a
mouse click away from seeing live video and being in total
control of your location.
From the toolbar
across the top; select the CALL tool. This tool is
represented by two computers connected by a yellow arrow.
Clicking
this tool will open up the SITE LIST PANEL.
connect
To
connect to a location; select one from the list shown and
press the CONNECT button.
You
may also select the EDIT button to make any additional changes
for the location configuration.
Clicking
on the binoculars will open a traditional word search. This
will allow you to search for a location by address, contact
name, etc.
You will notice
that the Modem Status Window will display your progress
in the connection process. As you first dial into the remote
unit and then begin the monitoring process.
In addition once
you are connected the Real-time Connection Window
will also begin to give you additional feedback and information
password
You
will be asked to key in a PASSWORD, Enter the same password
in the confirm field and press 'OK'.
The
unit saves the password and sends a unique ID to the software.
The software will identify a new ID and asks you to confirm
Click 'OK' to accept the new ID.
Once connected;
depending on the configuration at the site the tool
bar will expand to introduce additional tools. Also
the CALL BUTTON ICON in the tool bar will change to show
a red line connecting the two computers.
The
use of the new tools will be discussed later.
Lastly
Once
you are connected the camera views will become visible and active.
Pressing
the Call button again; terminates the connection.
loading...PLEASE
WAIT...thank you
