WELCOME TO OZLINE REMOTE VIDEO

Technical Update

WINDOWS XP INSTALLATION

1. Go to START/CONTROL PANEL

2. Choose Phone and Modem Options

3. Choose Modem Section

4. Double click on on the name of your modem

5. Choose Advanced section

6. Type E1 in the Extra Initialize Command field

7. Save the changes
(Click OK on the next two screens)

Arming/Disarm from alarm panel

1) Assign an aux output on an alarm panel for arm/disarm(open-close)

2) Run a relay from Alarm panel to the arm/disarm feature on the OzVision unit.

3) You must send a pulse signal(momentary contact closure) to arm the Oz unit from the panel. Then send a pulse (momentary dry contact closure) once again to disarm the Ozvision.

NOTE: You can not send a constant signal, it must be a pulse(momentary).

Please call technical support if you need additional support on these issues
@ 800-385-2317.

software

Control Center Software

hardware requirements

CPU: Intel Pentium II 550 MHZ MMX processor.
Memory: 128MB of memory
Free Space: 5MB available disk space.
Modem: 33.6/56K
Operating System: Windows 98/2000/NT4/XP.
Minimum screen resolution: 800X600, 24 true bit colors.

features

Program the unit to visit sites automatically acting like a guard patrolling your assets
Records PRE-alarm images for all cameras and transmits these with POST-alarm images
Icon Driven...point and click interface
Complete LOG of all events
Activate/Deactivate appliances remotely
Control P,T,Z (pan/tilt/zoom) of cameras
Total control of video quality and window size

Download and compare

To assist you in seeing the capabilities of the OzVision Control Center Software we have included a fully functioning demonstration of the software on our website. Included with the software are a series of preconfigured Demonstration Locations that allow you to call in using the OzVision software and begin to experience the power of the Control Center.

Just Right Mouse Click on any of the Software sample images on this page and select 'Save Target As' or "Save Link As' for Netscape users.

point and click toolset

As powerful as the software is no programming skills are required to take advantage of all of it's features. If you have ever surfed the internet you already possess all the skills required to turn your computer into a high power central station monitoring facility.

connect to site

Managing multiple facilities is easy. Just select to location your wish from the drop down list presented. Configuring a new location in the software takes only seconds. Password protection and user ID tags are present. This allows facility managers to monitor subordinates with system access.

play recorded files

Easy access to all your video files; complete with time/date stamp. Sort files by a variety of parameters.

arrange windows

All video windows can be toggle from live to recorded video sources. In addition a right click on these too allows the user to save his current settings and further configure the video to his or her liking. Multiple configurations may be saved to reflect different settings for different locations.

print window

This features allows for the current selected window to be printed via any printer attached to the computer including faxes. You can also drag the selected window to the print button.

take a snapshot

Clicking this button will save the currently selected window as a bitmap; to the drive specified.

scheduler

Need to manage multiple locations while you are away? No problem the powerful scheduler feature allows you to preprogram the system; setting literally every parameter you can imagine.

image enhancement

Clicking this tool will activate LVIEW; a graphics enhancement utility that will allow you to improve or enlarge the current viewing window then print it or save it.

system maintenance

All site and hardware parameters can be set here.

sitemap

Any information you have providing for the location when it was configured and be easily called up with a simple click

PLEASE REFER TO MANUAL FOR DETAILED TOOL DESCRIPTIONS

Control Center Software Demo

Click on the image above to download the WINZIP file containing the demo version of our Control Center Software. The only limitation to the demo software is that after connecting to a location; the software will automatically disconnect after 5 minutes. You can call back in but once again will be disconnected again after 5 minutes.

Please note that you will need to unzip the download with a program called WinZip.

To download the latest FREE evaluation copy just click the WINZIP logo below

additional literature

Control Center Software users manual

you can view the manual online with Adobe Acrobat by clicking the image below.

version 3.0 required